160hp Bulldozer SD6N
Main Features |
|||||||||||||
SD6N bulldozer is 160 horsepower track-type dozer with hydraulic direct drive, semi-rigid suspended and hydraulic pilot control. The chain type bulldozer appropriate for wast dressing and compaction in special wast association landfill site and serving spoon up loose waste and waste material from the ground, such as earth, sand or drive round the bend and moves it from one place to another place through pushing the material across the ground. It also commonly used to move a stock up on material or waste from ground level and dump it into and open trench.
Engine equipped with CUMMINS QSL8.9 stage 3 emission standards ( Original American Cummins ), the engine has the characteristics of big torque reserve coefficient and capacity against over-load. Electronic control engine, with powerful output, economical efficiency and durability.
The torque converter is a hydro-mechanical converter whose power is divided outside, which has the characteristics of wide high efficiency range. Cab : adopting sealed structure, cab chassis is fixed with shock absorption, buffer device at six position, outside adhered with fireproofing and pugging. Upgrade of the electrical system: the instruments and dashboard are original America, which can monitor the rotating speed, water temperature of engine, and the oil pressure of the hydraulic system, equipped with warning functions enable the operators to make all kinds of maintenance in time conveniently. Easy maintenance with two piece master link, hydraulic track adjusters, steering clutches and brakes are removable as a unit. Choice of ROPS/FOPS air conditioned tilt cab or open ROPS/FOPS canopy of ripper |
|||||||||||||
The Main Performance Parameter of Bulldozer SD6N |
|||||||||||||
Overall dimension without ripper |
5136x3324x3077mm |
Operating weight (without ripper) |
16800kgs |
||||||||||
Ground pressure |
56.20Kpa |
Ground clearance |
445mm |
||||||||||
Length of track on ground |
2667mm |
Grade ability |
30°/ 25° |
||||||||||
ENGINE |
|||||||||||||
Type |
Cummins (made in USA) QSL8.9 |
Flywheel power |
126kw/160hp |
||||||||||
Rated speed |
1850rpm |
Torque |
880N.m/1200rpm |
||||||||||
Fuel system |
High pressure common rail system |
Emission standard |
Euro III |
||||||||||
TRANSMISSION |
|||||||||||||
Power shift and hydraulic control Planetary , power shift transmission with three speeds forward and three speeds reverse, speed and direction can be quickly shifted. |
|||||||||||||
Forward speed |
1 4.0km/h |
Reverse speed |
1 4.8km/h |
||||||||||
STEERING & BRAKE |
|||||||||||||
Steering system : multiple-disc oil power metallurgy disc compressed by spring hydraulic operated |
|||||||||||||
UNDERCARRIAGE |
|||||||||||||
Suspension : swing type of sprayed beam. Suspended structure of equalizer bar |
|||||||||||||
Type |
Swing type of sprayed beam, suspended structure of equalizer bar |
Number of track rollers |
7 |
||||||||||
Track frame |
Monocoque, single grouse |
Number of rollers |
7 |
||||||||||
Number of carrier rollers ( each side ) |
2 |
Track shoe height |
61mm |
||||||||||
Width of track shoe |
560mm |
Number of shoe ( each side ) |
39 |
||||||||||
Pitch |
203mm |
Track gauge |
1880mm |
||||||||||
FINAL DRIVES |
|||||||||||||
Crown shaven, double reduction final drives, floating ring seals, sprocket with bolt on, replaceable rim segments |
|||||||||||||
HYDRAULIC CONROLS |
|||||||||||||
Four optional systems are available, complete system consists of pump, tank, filters, valves, linkage and control levers anticavitation valve is included with bulldozer controls. System available are as following: |
|||||||||||||
IMPLEMENT HYDRAULIC SYSTEM |
|||||||||||||
Model |
PERMOCO ( USA ) 5100 series |
Max system pressure |
170bar |
||||||||||
Pump type |
High pressure gears pump |
System output |
160L/min |
||||||||||
Control type |
Pilot control with single joystick |
Number of lift cylinder |
2 |
||||||||||
Bore*stroke of lift cylinder |
100mm*1000mm |
-- |
-- |
||||||||||
CABIN |
|||||||||||||
Cabs are available for operator’s choice with adjustable seat, with two large doors for easy entry / exit and excellent viewing area. |
|||||||||||||
SERVICE REFILL CAPACITIES |
|||||||||||||
Fuel tank |
275L |
Hydraulic tank |
75L |
||||||||||
Engine oil |
20L |
Cooling system |
40L |
||||||||||
Transmission,bevel gear and steering clutch compartments |
92L |
Final drives ( each ) |
19L |
||||||||||
SPECIFICATION FOR BLADES |
|||||||||||||
Type |
Capacity |
Width |
Height |
Digging depth |
Max lifting above ground |
Digging angle |
|||||||
Straight |
4.6m3 |
3324mm |
1170mm |
592mm |
998mm |
55° |
|||||||
Angle |
4.9m3 |
3789mm |
1140mm |
592mm |
998mm |
55° |
|||||||
U blade |
6.7m3 |
3703mm |
1350mm |
592mm |
998mm |
55° |
|||||||
SPECIFICATION FOR RIPPER |
|||||||||||||
Number of shanks |
Length |
Width |
Height |
Max penetration |
Max ground clearance |
||||||||
3 |
1207mm |
2343mm |
1353mm |
530mm |
218mm |
||||||||
DIMENSIONS |
|||||||||||||
|
|
||||||||||||
Item |
Standard ( straight-tilting blade ) |
||||||||||||
1.Length of basis tractor |
3989mm |
||||||||||||
2.Machine height from the ground |
|
||||||||||||
Without ROPS |
3077mm |
||||||||||||
With ROPS |
3250mm |
||||||||||||
3.Height to top of fuel tank |
2155mm |
||||||||||||
4.Height to top of exhaust |
3077mm |
||||||||||||
5.Height to top of radiator |
1922mm |
||||||||||||
6.Height to bulldozer trunnion |
438mm |
||||||||||||
7.Distance from rear of tractor to bulldozer trunnion |
1716mm |
||||||||||||
8.Rear clearance from rear of tractor |
530mm |
||||||||||||
9.Width of tractor |
|
||||||||||||
With blade |
3324mm |
||||||||||||
Over trunnions |
2842mm |
||||||||||||
Without trunnions ( standard shoe width ) |
2440mm |
||||||||||||
10.Ground clearance |
445mm |
||||||||||||
11.Track gauge |
1880mm |
||||||||||||
12.Width of top of cab with lamps |
1390mm |
||||||||||||
13.Length from the front of basic tractor to the edge of blade |
1322mm |
||||||||||||
14.Overall length with ripper |
6145mm |
||||||||||||
15.Length of track on ground |
2667mm |
- Previous Product:230hp Bulldozer SD7N